The Lastest in Gutter Products, Saving You Time & Money !!!

New! ...Underground Downspout Kits

1. Select an area for the Bubbler pot at least eight feet from the house in line with your down spout.

2. Dig a hole eight inches deep and twelve inches in diameter for the Bubbler pot to set in.

3. Scoop out a shallow trench from the house to the Bubbler pot, slopping from four inches deep to eight inches deep at the pot.

4. Using standard 4" thin wall P.V.C. pipe and elbow. Fit one end of the pipe into the Bubbler pot the other end to the elbow.

5. Hold the Debris Filter up against the house just under your down spout and measure the length of pipe needed to connect the
    Debris Filter to the elbow.

6. Back fill the trench and around the pot with dirt and tamp down. Congratulations your done.!!!!

7. I Recommend 12 inches of drainage stone under the pot. Once the pot is laying on the drainage stone, put landscape fabric around the pot before you backfill. This way the dirt doesn't plug up the drainage stone and it still functions great in the winter months as their is drain holes in the bottom of the pot too.